FFP3 Face Mask 1310 V NR D

FFP3 Face Mask 4310 VNRD
In stock


  • 50 xOEL protection level (According to NPF)
  • Foldable
  • Valve
  • CE Certified
  • Complies with EN 149:2001+A1:2009 standards.

Warning Figure - 1
Read the Operating Instructions.
Warning Figure - 2
Storage Temperature Range
Warning Figure - 3
Shelf Life
Warning Figure - 4
Storage Humidity
Warning Figure - 5
Warning Figure - 6
Provides requirements against clogging with Dolomite Powder

Instructions for use

Instructions for useInstructions for use

Check the selected mask before entering it.
As in Figure 3, take a breath and test for leaks.
If there is a leak, perform the reassembly operation as shown in figure 1-2-3-4.
At least 19.5% oxygen should be present in the study area. Otherwise, the mask cannot be used.
Do not use the mask in places such as airless wells, warehouses and warehouses where there is not enough oxygen.
Masks do not provide protection against gas and steam.
Immediately replace the mask as soon as there is a significant level of breathing resistance to the working environment.

Keep the mask as supplied by the manufacturer.
The temperature of the storage area should be between -20° C and + 40° C.
The storage humidity must be at most 80%.

Extended reviews

No posts found

Write a review